MTX Audio Announces New Audio Kit For Can Am X3 Vehicles

PHOENIX, AZ (04.02.2021) – MTX Audio, of the MiTek Electronics and Communications Group, is announcing the introduction of all new audio kits and components to their lineup for select Can-Am Maverick X3 model vehicles. This new offering is building off the success of the Polaris RZR audio kits introduced last year and will be available for most 2017 and newer model vehicles.

The new components will consist of a low-profile dash mounting kit that works with our AWMC3 media receiver, fully assembled front upper and separate lower speaker enclosures as well as available driver and passenger loaded subwoofer enclosures.

The source unit mounting kit features the lowest profile of any on the market and mounts using existing factory mounting points. It retains full access to the factory fuse panel and does not interfere with any factory or aftermarket intrusion bars. The mounting shroud is factory color and texture matched for a seamless look and feel once installed.

The upper dash speakers incorporate a newly developed 4-inch coaxial driver with neodymium motor structure designed to deliver higher output and better clarity than standard off the shelf 4-inch speakers.  This is combined with a weather tight enclosure that fits to the upper dash panels and uses a Rider Aligned Acoustical Design (R.A.A.D.) that delivers more on-axis sound than other designs and features an integrated plug and play harness. Additionally, the design does not require additional brackets or major modification to the upper panels and fitment works with all factory and aftermarket roll cages which feature intrusion bars.

The lower kick panel enclosures use a 6.5-inch coaxial driver with integrated RGB lighting in a weathertight plug and play design.  The harness also integrates an expansion plug to easily add-on the upper dash speakers eliminating the need for extensive rewiring when adding them into the system. The Fully Adjustable, Single Tool (F.A.S.T.) mounting system uses powder coated machined billet aluminum clamps and is designed to give maximum fitment flexibility. This allows the installer to adjust the placement relative to the vehicles body panels eliminating gap issues and ensuring the best fit possible.

The sub enclosures consist of an industry first, high output 12-inch subwoofer in a sealed Slim Line Enclosure Design (S.L.E.D.) that mounts under the seats. The enclosures are down firing with integrated 300-watt shallow mount subwoofers and will not interfere with any of the vehicles high/low position seat adjustability for both factory and aftermarket seats. Installation is made easy with our One Tool Installation System (O.T.I.S.) which reduces the install time and complexity eliminating the need for multiple tools or vehicle modification. High density Neoprene foam has been applied to all contact points to eliminate panel rattles and an anti-vibration kit with installation tool is provided in the package.

Also being introduced are all new complete plug and play packages. These packages will be available in three, five, six or eight speaker layouts and all will incorporate 1000-watts of RMS amplifier power to drive them. They will be packaged with everything needed for installation including integrated audio and power harnesses as well as all necessary hardware. Installation of the kits requires minimal vehicle modification, and each individual component installs in an average of 5-15 minutes. Comprehensive installation videos will also be available for step-by step guided instruction showing the entire process, start to finish.

“Consumer expectations have risen and it’s not just about power and the number of speakers anymore. Consumers need to trust that the product sounds just as good with helmets on and the throttle pinned as it does while hanging around camp.” said Director of Sales and Marketing, Jason Fickas. “The level of thought and detail that has gone into these kits is unmatched in the industry both in performance and integration, and we’re anxious for our customers to see the results of combining the ground-up resources of MTX with a talented development team who just happen to be passionate enthusiasts as well.”

The new Can-Am X3 kits and components are slotted to start shipping in June and more details will follow soon. Be sure to follow us on social media or check out our website for more details as they develop.

Visit www.mtx.com for more.

MTX Appoints Rock-N-Rev Sales in MINKS States

PHOENIX, AZ (02.26.2021) – MiTek Corporation has announced the hiring of ROCK-N-REV Sales & Marketing to represent MTX Audio in the Midwest states.

Long time industry veteran Jeff (Boody) Budin will service MTX in the states of NE, IA, KS, MO, and Southern IL.

Jeff Budin pictured with MTX Top Selling TERMINATOR Bass Package.

 “Jeff is no stranger to the MTX family and we’re happy to welcome him back.” stated MiTek Director of Sales and Marketing Jason Fickas, “The timing couldn’t be better. With Jeff’s strict focus on dealer support and a history of territory development along with our aggressive product plans, the coming years will be very exciting together”

MTX remains one of the most iconic brands in the 12-Volt Industry and now with strict MAP Policies in place it’s easy to see why the company sees a bright future with Budin back at the helm.

The new MTX Powersports Merch Kit includes POP plus a floor standing display. 

For more information on MTX availability in the Midwest please contact ROCK-N-REV Sales at rocknrevsales@gmail.com    

MTX Audio Shipping New Polaris RZR Audio Kits and Components

PHOENIX, AZ (06.16.2020) – MTX Audio is announcing their new audio kits and components for Polaris RZR side-by-side vehicles are now shipping. The new products are compatible to most 2014+ RZR models including the newer Turbo S. 

The complete audio systems are available in three different configurations and are compatible with Ride Command and non-Ride Command vehicles. Available are a two, three and five speaker kit that feature simple to install components, fast interconnection with fully plug and play harnesses and all at a price that won’t break the bank leaving enough left over to gas up your ride. Whether you’re looking for a starter system with front stage audio or you want the complete party package to become the envy of all your friends, we have a kit just right for you. 

Jason Planck is pictured in the MTX Phoenix HQ with the new MTX RZR-14-SW 10” sub enclosure that is available as part of the MTX Audio RZR kits or separately.

Also shipping are the new RZR-14-FS front speaker pods with integrated RGB lighting and the RZR-14-SW subwoofer enclosure for the same series of vehicles. The front pods come fully assembled out of the box saving you critical steps and time during the install. Another key design element is that they physically install in minutes using our custom quick install bracket and integrated POD-LOC technology reducing your down time from riding. With the updated design and features, they deliver high quality output even under the most extreme riding conditions. 

The RZR-14-SW features a high output 10-inch woofer in a rotationally molded enclosure designed to produce deep resonating bass while limiting transferred resonance into the vehicle panels reducing rattles inherent to low bass. Considering all types of riding, the enclosure is designed to be ported or sealed and easily converted by installing our Quick Install Port Seal (QuIPS) cover. Not only does this change the configuration of the enclosure but it can also be used, in the event of a deep-water situation, to seal the enclosure from water penetration protecting the internal components from damage. The unit does not interfere with passenger legroom by mounting in place of the vehicles glove compartment and features an installer friendly hardware system that allows one person to quickly install the enclosure with minimal effort. 

Visit www.mtx.com for more. 

MTX Audio Announces New Polaris RZR Audio Kits and Components Available for Pre-Order

 PHOENIX, AZ (05.12.2020) – MTX Audio, of the MiTek Electronics and Communications Group, is announcing pre-order options for their new audio kits and components for Polaris RZR Side-by-side vehicles through their website and authorized dealers. The new products are compatible to most 2014+ models including the newer Turbo S models. 

The audio kits consist of two, three, and five speaker options with power ranging from 200 watts up to a thundering 1000 watts RMS for vehicles with and without Polaris Ride Command installed. These complete audio solutions feature all wiring and hardware needed to quickly get you behind the wheel enjoying the industry-leading sound quality and trail tested durability you’ve come to expect from MTX Audio. 

Also available for pre-order are the new RZR-14-FS front speaker pods with integrated RGB lighting and the RZR-14-SW subwoofer enclosure for the same series of vehicles. The front pods are fully sealed and assembled enclosures eliminating the potential for damage or lost time from having to put them together before installing them. Another key design element is that they physically install in minutes using our custom quick install bracket and integrated POD-LOC technology. With the updated design and features, they deliver high quality output even under the most extreme riding conditions. 

The RZR-14-SW features a high output 10-inch woofer in a rotationally molded enclosure designed to produce deep resonating bass while limiting transferred resonance into the vehicle panels reducing rattles inherent to low bass. Considering all types of riding, the enclosure is designed to be ported or sealed and easily converted by installing our Quick Install Port Seal (QuIPS) cover. Not only does this change the configuration of the enclosure but it can also be used, in the event of a deep-water situation, to seal the enclosure from water or mud penetration protecting the internal components from damage. The unit does not interfere with passenger legroom by mounting in place of the vehicles glove compartment and features an installer friendly hardware system that allows one person to quickly install the enclosure with minimal effort. 

With an expected shipment time of mid-June, you won’t want to delay in getting yours secured today and be the first in your group to show off the next best audio solution in UTV audio systems.

Visit www.mtx.com for more. 

MTX Audio Announces New Audio Kits and Components for 2014+ Polaris RZR Vehicles

PHOENIX, AZ (03.31.2020) – MTX Audio is announcing the introduction of all new audio kits and components to their lineup of Polaris RZR audio products. This new offering is primarily in response to the changes that Polaris made in the RZR platform starting with the 2019 Turbo S models and will be backwards compatible to most 2014+ models.

Two of the primary component additions are with the front and subwoofer speaker systems. A variation from our other model of front speaker pods, the new RZR-14-FS will mount in the footwell in a kick pod style installation using our new POD-LOC technology. These have been engineered to maximize the audio output without sacrificing legroom, sound quality or output while riding. Additionally, the speaker pods installation time has also been addressed with a simple to install, quick mount bracket and single bolt mounting system that gets the speakers mounted in the vehicle in minutes.

The subwoofer option, the RZR-14-SW, is a completely new design of the enclosure as well as the components inside.  The enclosure consists of a high output 10-inch subwoofer in a convertible sealed/ ported design made possible through our Quick Install Port Seal technology or QuIPS. We’ve also added heavy duty Neoprene sound damping to the exterior of the enclosure to greatly reduce bass induced rattle in the vehicles body panels improving the overall sound quality when you’re riding. The enclosure is intended to be coupled with the MUD600-1 mono-block amplifier and mounts in place of the vehicles glove compartment and features a side firing design to maximize bass output. The ported design capability allows it to produce deep vibrating bass while the QuIPS technology helps protect your investment in case of deep-water situations by simply installing the seal before going submersible.

Also being introduced are all new RZR audio kits that are designed to fit more models and platforms than ever before. They will consist of a total of six packages that will work on Ride Command and non- Ride Command vehicles alike from model years 2014 to present. These kits will offer different levels of audio experience from the basic package with our 200/400-watt RMS 2-speaker system, to a complete party in a box with our 1000-watt RMS 5-speaker system. All kits come complete with direct-fit hardware and plug-n-play harnesses for a frustration-free installation as well.

 “With the changes in the RZR platform in the last couple years, we saw this as an opportunity create an audio experience for our customers that goes above anything they’ve heard before.” said Director of Sales and Marketing, Jason Fickas. “We’ve put a lot of research and development into the new design of our kits to ensure they are the easiest to install without sacrificing any output or sound quality. I can’t wait for all types of riders out there to start experiencing this all new offering from us.”

 The new RZR kits and components are slotted to start shipping mid-May and more details will follow soon. Be sure to follow us on social media or check out our website for more details as they develop.

Visit mtx-audio.com for more.

MTX Audio Returns to the North Hall at SEMA 2019

PHOENIX, AZ (10.24.2019) – MTX Audio invites you to visit them this year at the upcoming Specialty Equipment Market Association (SEMA) Show November 5th – November 8th in Las Vegas, NV.

MTX Audio is making its return to the North hall this year and can be found in Booth #11823 in the Las Vegas Convention Center.

The company will have a second booth located outside of the Performance Pavilion in booth #62150. MTX will be showcasing new model specific audio components, current best sellers, and a variety of products that they manufacture for several OEM partners.

In their North hall booth, MTX will be displaying their custom “Junkyard Cat” Wildcat UTV loaded with an audio system featuring the MTX AWMC3 media controller, compression tower speakers, MUD amplifiers, and custom Subwoofer enclosure as well as an assortment of performance upgrades that make this Arctic Cat something you don’t want to miss. Additionally, they will feature a Polaris RZR S model UTV outfitted with their new vehicle specific, plug and play audio kit that also is compatible with the newer “Velocity” models as well as backwards compatible with older generations of RZR vehicles.

Their outside booth will have two Polaris RZR vehicles in it. One featuring their new Turbo S system powered up and ready for demo as well as theircustom XP model featuring multiple MUD65PL cage speakers, four square S65 model woofers in a custom under-seat enclosure and their all new front pod speakers ready to belt out the tunes.

As an additional treat, they’ll also have not one, but two custom drag cars from the Street Outlaws, No Prep Kings TV series on display. Shawn Wilhoit and his car “The Mistress” along with Brad “B-Rad” Eglian and “Luminasty” will be available to take photos and get autographs from the guys throughout the event. They’ll also be hosting a poster signing on Wednesday from 1-3 p.m.”

Visit mtx.com for more.