CHATSWORTH, CA (02.21.2020) – CRUX has introduced a Multi View Camera Integration& Radio Replacement Interface for Aftermarket Radios in Select Dodge, Jeep & Ram Vehicles with Uconnect Systems – RFM-UC1-AM.
The CRUX RFM-UC1-AM combines two categories into one as it is a multi-view camera integration & radio replacement interface for aftermarket radios for select Dodge, Jeep, & RAM vehicles. Some notable features are the It’s a radio replacement interface with SWC and factory 3.5mm Aux port retention, a reverse camera plus 6 video input interface for the Uconnect systems (Compatible with 8.4”, 5” and 4.3” Uconnect Systems)
Listed below are compatible models:
VEHICLE COMPATIBILITY
DODGE
2014 – 2015 | Dart
2014 – 2015 | Durango
JEEP
2014 – 2016 | Cherokee
2014 – 2016 | Grand Cherokee
RAM
2013 – 2017 | 1500
2013 – 2017 | 2500
2013 – 2017 | 3500
Key Features:
– Retains factory features in select Dodge, Jeep and RAM vehicles while functioning with an aftermarket radio.
– Retains Steering Wheel Controls via built-in, pre-programmed interface.
– Retains factory 3.5mm Aux Port.
– Adds a reverse camera plus 6 video inputs.
– Uses the steering wheel controls buttons to toggle between the sources.
– Turn signals automatically trigger the corresponding side camera.
– Turn signal camera trigger can be turned on or off by using the BACK button on the radio.
Optional add on cameras are available to complete the multi-view capability of the RFM-UC1-AM. Cameras available and sold separately include.
Visit cruxinterfacing.com for more.
12VoltNews.com 